Translations of this page:
This is an old revision of the document!
Parts list of the left arm is enumerated below. (Also you could use the parts to build the right arm.)
Name | Q'ty |
---|---|
servo_assem_type1.stl | 1 |
serve_horn.stl | 1 |
servo_bracket_elbow_1.stl | 1 |
servo_bracket_elbow_2.stl | 1 |
hand.stl | 1 |
Servo Motor (160mm) | 1 |
Servo Motor (180mm) | 1 |
Attention!: Before to merge the parts, you should connect servos' cables and control-board. When it was completed, please turn on both switches and keep the status.
Attention!: Please connect the white wire which is owned by a servo to inside of baseboard.
Attention!: Attach a servo-horn to 180[mm] servo. At that time, please check it is placed approximately parallel to edge of the servo.