Translations of this page:
User Tools
Sidebar
specifications:print_detail:arms
Table of Contents
Arm x2
Table of Contents
Overview
| 3D Printer Used | Print Region |
|---|---|
| Afinia H480 | Arm x2 |
 |  |
Files that Need to Print
servo_assem_type1.stl
| Q'ty | Z Resolution | Part Angle | Fill | Support Angle | Quality | Time |
|---|---|---|---|---|---|---|
| 2 | 0.15 [mm] | 30 [deg.] | Loose | 30 [deg.] | Normal | 1h 15m |
Placement & Result
servo_horn.stl
| Q'ty | Z Resolution | Part Angle | Fill | Support Angle | Quality | Time |
|---|---|---|---|---|---|---|
| 2 | 0.15 [mm] | — | Solid | — | Fine | 4m |
Placement & Result
servo_bracket_elbow_1.stl
| Q'ty | Z Resolution | Part Angle | Fill | Support Angle | Quality | Time |
|---|---|---|---|---|---|---|
| 2 | 0.15 [mm] | 30 [deg.] | Loose | 10 [deg.] | Normal | 13m |
Placement & Result
servo_bracket_elbow_2.stl
| Q'ty | Z Resolution | Part Angle | Fill | Support Angle | Quality | Time |
|---|---|---|---|---|---|---|
| 2 | 0.15 [mm] | 30 [deg.] | Loose | 10 [deg.] | Normal | 13m |
Placement & Result
hand.stl
| Q'ty | Z Resolution | Part Angle | Fill | Support Angle | Quality | Time |
|---|---|---|---|---|---|---|
| 2 | 0.15 [mm] | 30 [deg.] | Loose | 30 [deg.] | Fine | 1h 31m |
Placement & Result
specifications/print_detail/arms.txt · Last modified: 2021/04/01 13:52 (external edit)
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International
