Translations of this page:
User Tools
Sidebar
specifications:print_detail:body
Table of Contents
Body
Table of Contents
Overview
| 3D Printer Used | Print Region |
|---|---|
| Afinia H480 | Body |
 |  |
Files that Need to Print
body_front.stl
| Q'ty | Z Resolution | Part Angle | Fill | Support Angle | Quality | Time |
|---|---|---|---|---|---|---|
| 1 | 0.15 [mm] | 30 [deg.] | Loose | 45 [deg.] | Fine | 2h 42m |
Placement & Result
body_middle.stl
| Q'ty | Z Resolution | Part Angle | Fill | Support Angle | Quality | Time |
|---|---|---|---|---|---|---|
| 1 | 0.2 [mm] | 30 [deg.] | Loose | 10 [deg.] | Normal | 1h 52m |
Placement & Result
body_rear.stl
| Q'ty | Z Resolution | Part Angle | Fill | Support Angle | Quality | Time |
|---|---|---|---|---|---|---|
| 1 | 0.15 [mm] | 30 [deg.] | Loose | 10 [deg.] | Fine | 3h 12m |
Placement & Result
power_switch_holder.stl
| Q'ty | Z Resolution | Part Angle | Fill | Support Angle | Quality | Time |
|---|---|---|---|---|---|---|
| 1 | 0.15 [mm] | 30 [deg.] | Loose | 30 [deg.] | Normal | 34m |
Placement & Result
servo_bracket.stl
| Q'ty | Z Resolution | Part Angle | Fill | Support Angle | Quality | Time |
|---|---|---|---|---|---|---|
| 2 | 0.15 [mm] | — | Solid | — | Fine | 31m |
Placement & Result
servo_bracket_mirror.stl
| Q'ty | Z Resolution | Part Angle | Fill | Support Angle | Quality | Time |
|---|---|---|---|---|---|---|
| 2 | 0.15 [mm] | — | Solid | — | Fine | 31m |
Placement & Result
servo_fixer.stl
| Q'ty | Z Resolution | Part Angle | Fill | Support Angle | Quality | Time |
|---|---|---|---|---|---|---|
| 1 | 0.15 [mm] | 30 [deg.] | Loose | 10 [deg.] | Normal | 19m |
Placement & Result
specifications/print_detail/body.txt · Last modified: 2021/04/01 13:52 (external edit)
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International
