User Tools

Site Tools


This is an old revision of the document!

Firmware Installation

Table of Contents

Before You Install the Firmware

If you bought excepting loose selling control board, the firmware was already installed. You can skip this step and do the next step.

Preliminary Arrangements

To write PLEN2's firmware requires Arduino IDE ver.1.6.0 or later. Please download and install it before to do continued steps.

Installation Process

Download "PLEN2" repository.

Open “firmware.ino” (This is placed “/arduino/firmware/” directory) with Arduino IDE.

Choose target board as “Arduino/Genuino Micro”.

Take proper serial port to communicate your base-board. (Port name is different in each environments.)

Click upload button.

Next > Connect a Battery

tutorials/plen2/firmware.1461267546.txt.gz · Last modified: 2016/11/17 19:27 (external edit)