User Tools

Site Tools


tutorials:plen2:firmware

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision Both sides next revision
tutorials:plen2:firmware [2016/04/21 19:39]
127.0.0.1 external edit
tutorials:plen2:firmware [2016/11/17 10:27]
Guvalif
Line 14: Line 14:
 Next > [[battery]] Next > [[battery]]
 ---- ----
- 
-===== Before You Install the Firmware ===== 
-If you bought excepting loose selling control board, the firmware was already installed. 
-You can skip this step and do the next step. 
  
 ===== Preliminary Arrangements ===== ===== Preliminary Arrangements =====
-To write PLEN2's firmware requires Arduino IDE **ver.1.6.0 or later**.+To write PLEN2's firmware requires [[https://www.arduino.cc/en/Main/Software|Arduino IDE]] (created by **arduino.cc**) **ver.1.6.0 or later**.
 Please download and install it before to do continued steps. Please download and install it before to do continued steps.
 +
 +==== How to Download the Arduino IDE ====
 +Access the Arduino IDE download page, and then choose your environment.
 +
 +{{:tutorials:plen2:firmware:00_choose_f.png?direct}}
 +
 +
 +Click **"JUST DOWNLOAD"** button. (You do not need to select donation menu.)
 +
 +{{:tutorials:plen2:firmware:00_download_f.png?direct}}
 +
  
 ===== Installation Process ===== ===== Installation Process =====
tutorials/plen2/firmware.txt · Last modified: 2021/04/01 13:52 (external edit)