PLEN Playground - Wiki

User Tools

Site Tools

You are here: index.html » Tutorials » plen2 » Arm
tutorials:plen2:arm

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

tutorials:plen2:arm [2016/02/18 03:46]
Guvalif 		tutorials:plen2:arm [2021/04/01 13:52]
Line 1: Line 1:
-====== Arm ====== 
  
-===== Table of Contents ===== 
-  - [[introduction]] 
-  - [[firmware]] 
-  - [[arm]] **Current section** 
-  - [[foot]] 
-  - [[head]] 
-  - [[body]] 
-  - [[merge]] 
-  - [[wiring]] 
- 
-Prev > [[firmware]]\\ 
-Next > [[foot]] 
----- 
- 
-===== Parts List ===== 
-Parts list of the left arm is enumerated below. (Also you could use the parts to build the right arm.) 
- 
-^Name                                                                                                        ^  Q'ty  ^ 
-|[[https://github.com/plenproject/PLEN2/blob/master/stl/servo_assem_type1.stl|servo_assem_type1.stl]]        |  1     | 
-|[[https://github.com/plenproject/PLEN2/blob/master/stl/servo_horn.stl|serve_horn.stl]]                      |  1     | 
-|[[https://github.com/plenproject/PLEN2/blob/master/stl/servo_bracket_elbow_1.stl|servo_bracket_elbow_1.stl]]|  1     | 
-|[[https://github.com/plenproject/PLEN2/blob/master/stl/servo_bracket_elbow_2.stl|servo_bracket_elbow_2.stl]]|  1     | 
-|[[https://github.com/plenproject/PLEN2/blob/master/stl/hand.stl|hand.stl]]                                  |  1     | 
-|Servo Motor (160mm)                                                                                         |  1     | 
-|Servo Motor (180mm)                                                                                         |  1     | 
- 
- 
-===== Print Detail ===== 
-[[specifications/print_detail/arms]] 
- 
- 
-===== Assembling Process ===== 
-==== Parts List ==== 
-{{:tutorials:plen2:arm:00_parts_list.png?direct}} 
- 
-==== Upper Arm ==== 
-{{:tutorials:plen2:arm:01_attach_upper_arm_1.png?direct}} 
-{{:tutorials:plen2:arm:02_attach_upper_arm_2.png?direct}} 
- 
-**Attention!**: Please fit the conducting wire through inside a groove on **servo_assem_type1.stl**. 
- 
-{{:tutorials:plen2:arm:03_attach_upper_arm_ok.png?direct}} 
- 
-==== Hand ==== 
-{{:tutorials:plen2:arm:04_attach_elbow_1.png?direct}} 
-{{:tutorials:plen2:arm:04_attach_elbow_2.png?direct}} 
- 
-==== Merge Parts ==== 
-{{:tutorials:plen2:arm:05_connect_wires.png?direct}} 
-{{:tutorials:plen2:arm:05_connect_wires.sub.png?direct}} 
- 
-{{:tutorials:plen2:arm:06_attach_servo_horn.png?direct}} 
-{{:tutorials:plen2:arm:07_attach_hand.png?direct}} 
- 
-==== Finished Arm ==== 
-{{:tutorials:plen2:arm:08_complete.jpg?direct}} 
- 
----- 
-Prev > [[firmware]]\\ 
-Next > [[foot]] 
tutorials/plen2/arm.txt · Last modified: 2021/04/01 13:52 (external edit)

Page Tools

Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International
CC Attribution-Share Alike 4.0 International Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki