Translations of this page:
User Tools
Sidebar
specifications:print_detail:head
This is an old revision of the document!
Table of Contents
Head
Overview
| 3D Printer Used | Print Region |
|---|---|
| Afinia H480 | Head |
 |  |
Files that Need to Print
| servo_horn_rev1.stl | ||||||
|---|---|---|---|---|---|---|
| Q'ty | Placement | Z Resolution | Fill | Quality | Output Time | Print Result |
| 10 |  | 0.15 [mm] | Solid | Fine | 4 [min.] |  |
| servo_bracket_type1.stl | ||||||
|---|---|---|---|---|---|---|
| Q'ty | Placement | Z Resolution | Fill | Quality | Output Time | Print Result |
| 1 |  | 0.15 [mm] | Solid | Fine | 31 [min.] |  |
| servo_bracket_type1_mirror.stl | ||||||
|---|---|---|---|---|---|---|
| Q'ty | Placement | Z Resolution | Fill | Quality | Output Time | Print Result |
| 1 |  | 0.15 [mm] | Solid | Fine | 31 [min.] |  |
| servo_assem_type2.stl | ||||||
|---|---|---|---|---|---|---|
| Q'ty | Placement | Z Resolution | Fill | Quality | Output Time | Print Result |
| 2 |  | 0.15 [mm] | Loose | Fine | 72 [min.] |  |
| servo_assem_type2_mirror.stl | ||||||
|---|---|---|---|---|---|---|
| Q'ty | Placement | Z Resolution | Fill | Quality | Output Time | Print Result |
| 2 |  | 0.15 [mm] | Loose | Fine | 72 [min.] |  |
| servo_bracket_knee.stl | ||||||
|---|---|---|---|---|---|---|
| Q'ty | Placement | Z Resolution | Fill | Quality | Output Time | Print Result |
| 1 |  | 0.15 [mm] Support angle 30° | Loose | Normal | 52 [min.] |  |
| servo_bracket_knee_mirror.stl | ||||||
|---|---|---|---|---|---|---|
| Q'ty | Placement | Z Resolution | Fill | Quality | Output Time | Print Result |
| 1 |  | 0.15 [mm] Support angle 30° | Loose | Normal | 52 [min.] |  |
| servo_bracket_shin.stl | ||||||
|---|---|---|---|---|---|---|
| Q'ty | Placement | Z Resolution | Fill | Quality | Output Time | Print Result |
| 1 |  | 0.15 [mm] Support angle 40° | Loose | Fine | 65 [min.] |  |
| servo_bracket_shin_mirror.stl | ||||||
|---|---|---|---|---|---|---|
| Q'ty | Placement | Z Resolution | Fill | Quality | Output Time | Print Result |
| 1 |  | 0.15 [mm] Support angle 40° | Loose | Fine | 65 [min.] |  |
| servo_bracket_ankle_1.stl | ||||||
|---|---|---|---|---|---|---|
| Q'ty | Placement | Z Resolution | Fill | Quality | Output Time | Print Result |
| 1 |  | 0.15 [mm] | Loose | Normal | 11 [min.] |  |
| servo_bracket_ankle_1_mirror.stl | ||||||
|---|---|---|---|---|---|---|
| Q'ty | Placement | Z Resolution | Fill | Quality | Output Time | Print Result |
| 1 |  | 0.15 [mm] | Loose | Normal | 11 [min.] |  |
| servo_bracket_ankle_2.stl | ||||||
|---|---|---|---|---|---|---|
| Q'ty | Placement | Z Resolution | Fill | Quality | Output Time | Print Result |
| 1 |  | 0.15 [mm] | Loose | Normal | 10 [min.] |  |
| servo_bracket_ankle_2_mirror.stl | ||||||
|---|---|---|---|---|---|---|
| Q'ty | Placement | Z Resolution | Fill | Quality | Output Time | Print Result |
| 1 |  | 0.15 [mm] | Loose | Normal | 10 [min.] |  |
| foot.stl | ||||||
|---|---|---|---|---|---|---|
| Q'ty | Placement | Z Resolution | Fill | Quality | Output Time | Print Result |
| 1 |  | 0.20 [mm] | Loose | Normal | 28 [min.] |  |
| foot_mirror.stl | ||||||
|---|---|---|---|---|---|---|
| Q'ty | Placement | Z Resolution | Fill | Quality | Output Time | Print Result |
| 1 |  | 0.20 [mm] | Loose | Normal | 28 [min.] |  |
specifications/print_detail/head.1452572965.txt.gz · Last modified: 2021/04/01 13:52 (external edit)
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International
