Differences

This shows you the differences between two versions of the page.

--- tutorials:plen2:head [2015/10/21 16:06]
roknk
+++ tutorials:plen2:head [2021/04/01 13:52] (current)
@@ Line 2: / Line 2: @@
 ===== Table of Contents =====
-  - [[tutorials/plen2/assembling_instructions]]
+  - [[firmware]]
-  - [[tutorials/plen2/arms]]
+  - [[battery]]
-  - [[tutorials/plen2/legs]]
+  - [[arm]]
-  - [[tutorials/plen2/body]]
+  - [[leg]]
-  - [[tutorials/plen2/head]] **Current section**
+  - [[head]] **Current section**
-  - [[tutorials/plen2/marge]]
+  - [[body]]
-  - [[tutorials/plen2/Wiring_Number]]
+  - [[merge]]
+  - [[cover]]
+  - [[tune]]
-Prev > [[body]]\\
+Prev < [[leg]]\\
-Next > [[marge]]
+Next > [[body]]
 ----
-<markdown>
+===== Parts List =====
-## Parts List
+Parts list of the head is enumerated below.
-|Name                      |Q'ty|
-|:--------------------     |:--:|
-|head                      |1   |
-|Head board                |1   |
-|barb                      |1   |
-### Parts forme
+^Name                                                                             ^  Q'ty  ^
-</markdown>
+|[[https://github.com/plenprojectcompany/PLEN2/blob/master/stl/head.stl|head.stl]]|  1     |
-[[https://github.com/plenproject/PLEN2/blob/master/stl/]]
+|[[https://github.com/plenprojectcompany/PLEN2/blob/master/stl/chin.stl|chin.stl]]|  1     |
+|Head Board                                                                       |  1     |
-<markdown>
-## Assembling Procedure
-### Placement
-</markdown>
-{{:tutorials:plen2:dsc01014.jpg?direct&200|}}
+===== Print Detail =====
-{{:tutorials:plen2:dsc01017.jpg?direct&200|}}
+[[specifications/print_detail/head]]
-{{:tutorials:plen2:dsc01018.jpg?direct&200|}}
-To be continued to [[marge]].
+===== Assembling Process =====
+==== Parts List ====
+{{:tutorials:plen2:head:00_parts_list.jpg?direct}}
+==== Attach Head Board ====
+**Attention!**:
+In attaching the chin and the head board, head-board's cable pass through inside the barb.
+{{:tutorials:plen2:head:01_through_cable.png?direct}}
+**Attention!**:
+Please fit eyes' leds grooves on the chin.
+When it was completed, please tighten eyes' hexagonal nuts.
+{{:tutorials:plen2:head:02_attach_head_board.png?direct}}
+==== Finished Head ====
+{{:tutorials:plen2:head:03_attach_head.jpg?direct}}
 ----
-Prev > [[body]]\\
+Prev < [[leg]]\\
-Next > [[marge]]
+Next > [[body]]

PLEN Playground - Wiki

User Tools

Site Tools

Differences

Page Tools