User Tools

Site Tools


This is an old revision of the document!

Firmware Installation

Preliminary Arrangements

To write PLEN2's firmware requires Arduino IDE ver.1.6.0 or later. Please download and install it before to do continued steps.

Installation Procedure

Download "PLEN2" repository.

Open “firmware.ino” (This is placed “/arduino/firmware/” directory) with Arduino IDE version 1.6.0 or later.

Choose target board as “Arduino/Genuino Micro”.

Take proper serial port to communicate your base-board. (Port name is different in each environments.)

Click upload button.

tutorials/plen2/firmware.1454483085.txt.gz · Last modified: 2016/02/03 07:04 by Guvalif