Differences

This shows you the differences between two versions of the page.

--- tutorials:plen2:firmware [2016/11/17 10:27]
Guvalif
+++ tutorials:plen2:firmware [2021/04/01 13:52] (current)
@@ Line 16: / Line 16: @@
 ===== Preliminary Arrangements =====
-To write PLEN2's firmware requires [[https://www.arduino.cc/en/Main/Software|Arduino IDE]] (created by **arduino.cc**) **ver.1.6.0 or later**.
+To write PLEN2's firmware requires [[https://www.arduino.cc/en/Main/Software|Arduino IDE]] (created by **arduino.cc**) **ver.1.6.0 or above**.
 Please download and install it before to do continued steps.
@@ Line 55: / Line 55: @@
 {{:tutorials:plen2:firmware:05_upload_f.png?direct}}
+===== Tips =====
+If you want to install the firmware to PLEN1.4 or PLEN2 developer edition,
+you need to edit a few of codes in reference to following topics.
+Before to do process below, please open //[[https://github.com/plenprojectcompany/plen-Firmware_Arduino/blob/master/firmware/BuildConfig.h|BuildConfig.h]]//.
+{{:tutorials:plen2:firmware:02.5_select_f.png?direct}}
+==== How to Apply the Firmware to PLEN1.4 ====
+Applying the firmware to PLEN1.4, the firmware should be edited about
+[[https://github.com/plenprojectcompany/plen-Firmware_Arduino/blob/master/firmware/BuildConfig.h#L21|line 21]] and
+[[https://github.com/plenprojectcompany/plen-Firmware_Arduino/blob/master/firmware/BuildConfig.h#L30|line 30]].
+{{:tutorials:plen2:firmware:02.5_edit_f.png?direct}}
+==== How to Apply the Firmware to Developer Edition ====
+Applying the firmware to PLEN2 developer edition, the firmware should be edited about
+[[https://github.com/plenprojectcompany/plen-Firmware_Arduino/blob/master/firmware/BuildConfig.h#L38|line 38]].
+{{:tutorials:plen2:firmware:02.5_edit_developer_f.png?direct}}
 ----
 Next > [[battery]]

PLEN Playground - Wiki

User Tools

Site Tools

Differences

Page Tools