PLEN Playground - Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== Foot x2 ======

===== Overview =====

^ 3D Printer Used     ^ Print Region           ^
| Afinia H480         | Foot x2                 |
| {{h480.jpg?direct}} | {{leg.jpg?direct&350}} |

===== Files that Need to Print =====

^ servo_horn_rev1.stl                                                                                                                              ^^^^^^^
^ Q'ty ^ Placement                                        ^ Z Resolution ^ Fill  ^ Quality ^ Output Time ^ Print Result                                  ^
| 10   | {{servo_horn_rev1.stl.placement.png?direct&120}} | 0.15 [mm]    | Solid | Fine    | 4 [min.]    | {{servo_horn_rev1.stl.result.jpg?direct&120}} |

^ servo_bracket_type1.stl                                                                                                                                  ^^^^^^^
^ Q'ty ^ Placement                                            ^ Z Resolution ^ Fill  ^ Quality ^ Output Time ^ Print Result                                      ^
| 1    | {{servo_bracket_type1.stl.placement.png?direct&120}} | 0.15 [mm]    | Solid | Fine    | 31 [min.]   | {{servo_bracket_type1.stl.result.jpg?direct&120}} |

^ servo_bracket_type1_mirror.stl                                                                                                                                         ^^^^^^^
^ Q'ty ^ Placement                                                   ^ Z Resolution ^ Fill  ^ Quality ^ Output Time ^ Print Result                                             ^
| 1    | {{servo_bracket_type1_mirror.stl.placement.png?direct&120}} | 0.15 [mm]    | Solid | Fine    | 31 [min.]   | {{servo_bracket_type1_mirror.stl.result.jpg?direct&120}} |

^ servo_assem_type2.stl                                                                                                                                    ^^^^^^^
^ Q'ty ^ Placement                                          ^ Z Resolution ^ Fill  ^ Quality ^ Output Time ^ Print Result                                        ^
| 2    | {{servo_assem_type2.stl.placement.png?direct&120}} | 0.15 [mm]    | Loose | Fine    | 72 [min.]   | {{servo_assem_type2.stl.result.png.jpg?direct&120}} |

^ servo_assem_type2_mirror.stl                                                                                                                                       ^^^^^^^
^ Q'ty ^ Placement                                                 ^ Z Resolution ^ Fill  ^ Quality ^ Output Time ^ Print Result                                           ^
| 2    | {{servo_assem_type2_mirror.stl.placement.png?direct&120}} | 0.15 [mm]    | Loose | Fine    | 72 [min.]   | {{servo_assem_type2_mirror.stl.result.jpg?direct&120}} |

^ servo_bracket_knee.stl                                                                                                                                                ^^^^^^^
^ Q'ty ^ Placement                                           ^ Z Resolution                ^ Fill  ^ Quality ^ Output Time ^ Print Result                                     ^
| 1    | {{servo_bracket_knee.stl.placement.png?direct&120}} | 0.15 [mm] Support angle 30°| Loose | Normal  | 52 [min.]   | {{servo_bracket_knee.stl.result.jpg?direct&120}} |

^ servo_bracket_knee_mirror.stl                                                                                                                                                       ^^^^^^^
^ Q'ty ^ Placement                                                  ^ Z Resolution                ^ Fill  ^ Quality ^ Output Time ^ Print Result                                            ^
| 1    | {{servo_bracket_knee_mirror.stl.placement.png?direct&120}} | 0.15 [mm] Support angle 30°| Loose | Normal  | 52 [min.]   | {{servo_bracket_knee_mirror.stl.result.jpg?direct&120}} |

^ servo_bracket_shin.stl                                                                                                                                                ^^^^^^^
^ Q'ty ^ Placement                                           ^ Z Resolution                ^ Fill  ^ Quality ^ Output Time ^ Print Result                                     ^
| 1    | {{servo_bracket_shin.stl.placement.png?direct&120}} | 0.15 [mm] Support angle 40°| Loose | Fine    | 65 [min.]   | {{servo_bracket_shin.stl.result.jpg?direct&120}} |

^ servo_bracket_shin_mirror.stl                                                                                                                                                       ^^^^^^^
^ Q'ty ^ Placement                                                  ^ Z Resolution                ^ Fill  ^ Quality ^ Output Time ^ Print Result                                            ^
| 1    | {{servo_bracket_shin_mirror.stl.placement.png?direct&120}} | 0.15 [mm] Support angle 40°| Loose | Fine    | 65 [min.]   | {{servo_bracket_shin_mirror.stl.result.jpg?direct&120}} |

^ servo_bracket_ankle_1.stl                                                                                                                                    ^^^^^^^
^ Q'ty ^ Placement                                              ^ Z Resolution ^ Fill  ^ Quality ^ Output Time ^ Print Result                                        ^
| 1    | {{servo_bracket_ankle_1.stl.placement.png?direct&120}} | 0.15 [mm]    | Loose | Normal  | 11 [min.]   | {{servo_bracket_ankle_1.stl.result.jpg?direct&120}} |

^ servo_bracket_ankle_1_mirror.stl                                                                                                                                           ^^^^^^^
^ Q'ty ^ Placement                                                     ^ Z Resolution ^ Fill  ^ Quality ^ Output Time ^ Print Result                                               ^
| 1    | {{servo_bracket_ankle_1_mirror.stl.placement.png?direct&120}} | 0.15 [mm]    | Loose | Normal  | 11 [min.]   | {{servo_bracket_ankle_1_mirror.stl.result.jpg?direct&120}} |

^ servo_bracket_ankle_2.stl                                                                                                                                    ^^^^^^^
^ Q'ty ^ Placement                                              ^ Z Resolution ^ Fill  ^ Quality ^ Output Time ^ Print Result                                        ^
| 1    | {{servo_bracket_ankle_2.stl.placement.png?direct&120}} | 0.15 [mm]    | Loose | Normal  | 10 [min.]   | {{servo_bracket_ankle_2.stl.result.jpg?direct&120}} |

^ servo_bracket_ankle_2_mirror.stl                                                                                                                                           ^^^^^^^
^ Q'ty ^ Placement                                                     ^ Z Resolution ^ Fill  ^ Quality ^ Output Time ^ Print Result                                               ^
| 1    | {{servo_bracket_ankle_2_mirror.stl.placement.png?direct&120}} | 0.15 [mm]    | Loose | Normal  | 10 [min.]   | {{servo_bracket_ankle_2_mirror.stl.result.jpg?direct&120}} |

^ foot.stl                                                                                                                   ^^^^^^^
^ Q'ty ^ Placement                             ^ Z Resolution ^ Fill  ^ Quality ^ Output Time ^ Print Result                       ^
| 1    | {{foot.stl.placement.png?direct&120}} | 0.20 [mm]    | Loose | Normal  | 28 [min.]   | {{foot.stl.result.jpg?direct&120}} |

^ foot_mirror.stl                                                                                                                            ^^^^^^^
^ Q'ty ^ Placement                                    ^ Z Resolution ^ Fill  ^ Quality ^ Output Time ^ Print Result                                ^
| 1    | {{foot_mirror.stl.placement.png?direct&120}} | 0.20 [mm]    | Loose | Normal    | 28 [min.]   | {{foot_mirror.stl.result.jpg?direct&120}} |
PLEN Playground - Wiki

User Tools

Site Tools

Page Tools
