====== Arm x2 ======

===== Table of Contents =====
  * [[arms]] **Current section**
  * [[legs]]
  * [[head]]
  * [[body]]

----

===== Overview =====
^ 3D Printer Used     ^ Print Region                ^
| Afinia H480         | Arm x2                      |
| {{h480.jpg?nolink}} | {{.arms:region.jpg?nolink}} |


===== Files that Need to Print =====
==== servo_assem_type1.stl ====
^ Q'ty ^ Z Resolution ^ Part Angle ^ Fill  ^ Support Angle ^ Quality ^ Time   ^
| 2    | 0.15 [mm]    | 30 [deg.]  | Loose | 30 [deg.]     | Normal  | 1h 15m |

=== Placement & Result ===
{{.arms:placement:servo_assem_type1.jpg?nolink}}
{{.arms:result:servo_assem_type1.jpg?nolink}}


==== servo_horn.stl ====
^ Q'ty ^ Z Resolution ^ Part Angle ^ Fill  ^ Support Angle ^ Quality ^ Time   ^
| 2    | 0.15 [mm]    | ---        | Solid | ---           | Fine    | 4m     |

=== Placement & Result ===
{{.arms:placement:servo_horn.jpg?nolink}}
{{.arms:result:servo_horn.jpg?nolink}}


==== servo_bracket_elbow_1.stl ====
^ Q'ty ^ Z Resolution ^ Part Angle ^ Fill  ^ Support Angle ^ Quality ^ Time   ^
| 2    | 0.15 [mm]    | 30 [deg.]  | Loose | 10 [deg.]     | Normal  | 13m    |

=== Placement & Result ===
{{.arms:placement:servo_bracket_elbow_1.jpg?nolink}}
{{.arms:result:servo_bracket_elbow_1.jpg?nolink}}


==== servo_bracket_elbow_2.stl ====
^ Q'ty ^ Z Resolution ^ Part Angle ^ Fill  ^ Support Angle ^ Quality ^ Time   ^
| 2    | 0.15 [mm]    | 30 [deg.]  | Loose | 10 [deg.]     | Normal  | 13m    |

=== Placement & Result ===
{{.arms:placement:servo_bracket_elbow_2.jpg?nolink}}
{{.arms:result:servo_bracket_elbow_2.jpg?nolink}}


==== hand.stl ====
^ Q'ty ^ Z Resolution ^ Part Angle ^ Fill  ^ Support Angle ^ Quality ^ Time   ^
| 2    | 0.15 [mm]    | 30 [deg.]  | Loose | 30 [deg.]     | Fine    | 1h 31m |

=== Placement & Result ===
{{.arms:placement:hand.jpg?nolink}}
{{.arms:result:hand.jpg?nolink}}